Airsoft Canada - View Single Post - 226

m102404 · September 23rd, 2008, 11:36

Thanks for the replies.

All the hi-flow valves were assembled brand new from their packaging. o-rings lubed and thread teflon taped before installation into the mag bodies.

An addition drop or two of silicone oil was dropped on the main valve and into the mag for additional lube. The "buttons" seem to depress freely and rebound normally.

It's my first time using hi-flow valves. Is 15-20 shots from this type of setup typical?

Now that it's actually working for every shot, I'll start breaking it down piece by piece to see what the effects are.

September 23rd, 2008, 11:36	#4
m102404 Tys Trader rating Join Date: Apr 2006 Location: Toronto	Thanks for the replies. All the hi-flow valves were assembled brand new from their packaging. o-rings lubed and thread teflon taped before installation into the mag bodies. An addition drop or two of silicone oil was dropped on the main valve and into the mag for additional lube. The "buttons" seem to depress freely and rebound normally. It's my first time using hi-flow valves. Is 15-20 shots from this type of setup typical? Now that it's actually working for every shot, I'll start breaking it down piece by piece to see what the effects are.