Quote:
Originally Posted by Double Tapper
Can this use the same adapter used on the other grenades?.
I'm not to keen on buying a whole pile of powerlets when I can
use what I have already.
|
you do not need to use powerlets with that CO2 adapter. we have installed that directly on a 20oz CO2 tank and it has worked flawlessly. You basically take off the powerlet cage and mount the adapter with regulator/gauge right on your tank.
Quote:
Originally Posted by DarkAngel
if its co2, then cant the c02 pressure be regulated if its too much?
This IS why we have co2 regulator for our Madbull 203's right?
|
Agreed! In the video, the demonstrator says to charge at 800 psi but only fill for 2-3 seconds. Doing that does not give you the full 800 psi but fills short of that amount.
When we fill our nades (XM108HP, XM204HP, XMPB4) we fill them for much longer. Basically set the regulator to whatever psi and watch the needle.
So why not just charge to a lower psi setting like 400 or 500 psi?