Quote:
Originally Posted by Manchilada
Not a tension screw issue at all. I'll see if I can find the article.
|
If you have a heat gun, you can fix it up in about 5 minutes. My 6004 was way too tight for a KSC G19 (stock). Loosening the tension screws does nothing, as it's a slide width problem.
Remove the holster from the platform, and apply heat with a heat gun to the area where the slide would normally rest until the ABS softens up. Then, stick the gun in the holster and stick it in your freezer until it hardens up. Then put it back on the platfrom and you should be good to go.