[tjfast55]

Originally Posted by CDN_Stalker

Should ignore a lot of what was posted above, I can get you a good accurate gun for cheap on the upgrade side of things.

You have an EG700 motor in your gun, keep it, it's better than the EG1000.

Get a custom cut 330mm inner barrel, tightbore if you like. This will give you an extra 20fps on top of what you already shoot at compared to the stock length inner barrel.

Buy a V2 bearing spring guide (brand doesn't matter, just ignore Deep Fire), this will add about 15fps.

Install metal bushings, all are equal except in price.

Buy (from Jugglez, hell, get all the parts from him, he rocks), a Modify 100 spring. I receintly installed one of these and a bearing spring guide into a stock TM AK47, get 370fps out of it consistantly.

All this added together will keep your battery life happy, not bog down your rate of fire too much, and will get you in the 380-390fps range. All other upgrades mentioned above will cost you more and net you less, and even destroy your V2 mechbox (even if a reinforced one.) I've had a LOT of variances with upgrades through both my TM MP5s (SD and A), and what I just posted is what I have in my SD, it's sitting around 390fps now and works great.

That is pretty much what I have in my tm sd5, and its shooting around 400, with a nozzel and cylinder I will have in the area of 420...says my gunsmith.