Airsoft Canada - View Single Post

KEVORKIAN · May 13th, 2008, 00:13

I have 24 mags and I too have experienced feeding problems with some.
I have found that some mags lack spring tension which translates into the mags inability to feed bb's properly.

Simple fix:
- Completely disassemble mag and stretch the internal spring ever-so-slightly.There are two springs inside so make sure you stretch both.
- Do not over do it or you will have one hell of a time getting it back inside and you could also cause more trouble as well!
- Apply a little silicon oil to the two tiny springs on either side of the mag follower.
- Reassemble and test.

If you need a schematic to reassemble the mag have a look here:
http://www.systema-europe.com/Files/...ustrations.pdf

I have fixed four mags so far to date this way and they have never acted up since the repairs!

Good luck!

May 13th, 2008, 00:13	#61
KEVORKIAN Trader rating Join Date: Nov 2006 Location: Manitoba	I have 24 mags and I too have experienced feeding problems with some. I have found that some mags lack spring tension which translates into the mags inability to feed bb's properly. Simple fix: - Completely disassemble mag and stretch the internal spring ever-so-slightly.There are two springs inside so make sure you stretch both. - Do not over do it or you will have one hell of a time getting it back inside and you could also cause more trouble as well! - Apply a little silicon oil to the two tiny springs on either side of the mag follower. - Reassemble and test. If you need a schematic to reassemble the mag have a look here: http://www.systema-europe.com/Files/...ustrations.pdf I have fixed four mags so far to date this way and they have never acted up since the repairs! Good luck! __________________ Kevorkian I SUPPORT THE USE OF SILICA BB BASTARDS!