Airsoft Canada - View Single Post

damage · May 4th, 2008, 16:08

Could it be the cylinder? I cannibalized a brand new SR16/M4 Systema mechbox with turbo motor for parts and what I found out was the cylinder port hole is in the middle which is for short barreled Aeg. If you are using mid lenght inner barrel I may suggest to replace it with the right type of cylinder to get the right velocity/fps.

want to increase ROF try li-po.

Here's my high ROF set up. Feel free to test fire one of my Aeg at the games.

400fps rated spring with a 19 BPM(BB's per second, measured with Madbull chrono)
7mm bearing gearbox
Torque up gears
Deepfire piston
Systema Turbo Motor
11.1v 1200mah Li-po battery

BPM

May 4th, 2008, 16:08	#3
damage Trader rating Join Date: Jan 2005 Location: Port Coquitlam, BC	Could it be the cylinder? I cannibalized a brand new SR16/M4 Systema mechbox with turbo motor for parts and what I found out was the cylinder port hole is in the middle which is for short barreled Aeg. If you are using mid lenght inner barrel I may suggest to replace it with the right type of cylinder to get the right velocity/fps. want to increase ROF try li-po. Here's my high ROF set up. Feel free to test fire one of my Aeg at the games. 400fps rated spring with a 19 BPM(BB's per second, measured with Madbull chrono) 7mm bearing gearbox Torque up gears Deepfire piston Systema Turbo Motor 11.1v 1200mah Li-po battery BPM