View Single Post
Old April 17th, 2008, 16:05   #7
CDN_Stalker
Official ASC Bladesmith
 
CDN_Stalker's Avatar
 
Join Date: Jul 2003
Location: Ottawa, Ont.
Send a message via MSN to CDN_Stalker
Also, some guns are inherently more accurate by design than others. A stock TM MP5 will always outshoot a stock TM Armalite, simply by the design and the way the inner barrel is held. Armalite is "held" at the hop up unit, between a spring in front of it, rails at the sides and the mechbox at the rear. And that's about it. MP5 is screwed to the body, is helf by a clamp in front of the body, then also held inside the muzzle, so it has three points of security vs. the single point of an Armalite.

Accuracy, I do it all at 30ft in my basement, is a pretty damn good way to do it too. If there is a tight group at 30ft, that will give an idea of tightness of your BBs at 100ft (remember, small things become large things). Some guns will make a CD sized grouping at 30ft (new G&P SPR for example) and others will put 5-6 semi shots into a 1" hole at that distance (my MP5s are an example, and a SIG 552 I recently installed a tightbore into).

And heavier BBs will always be more accurate too, even at said 30ft.
CDN_Stalker is offline   Reply With Quote