Airsoft Canada - View Single Post

Chrios · April 15th, 2008, 03:50

It just replaces the stock handguard, so it's not a hard swap at all, especially since all the wiring is in the back of the gun.

Alls you has to do is remove the pin (upper right corner) and it'll come off.
http://cdn-www.pbreview.com/productp...6&product=3723

After that just put the RIS on, replace the pin and you're good to go. Unless something needs to be dremeled, that's all there is to it, but I had an RIS kit on my TM mp5a4 before and it wasn't an issue.

It's a fun peice of kit...Good luck with it! Cheers,

edit: the picture won't display, so you'll have to click the link to see the picture. feh.

April 15th, 2008, 03:50	#2
Chrios Trader rating Join Date: Sep 2003	It just replaces the stock handguard, so it's not a hard swap at all, especially since all the wiring is in the back of the gun. Alls you has to do is remove the pin (upper right corner) and it'll come off. http://cdn-www.pbreview.com/productp...6&product=3723 After that just put the RIS on, replace the pin and you're good to go. Unless something needs to be dremeled, that's all there is to it, but I had an RIS kit on my TM mp5a4 before and it wasn't an issue. It's a fun peice of kit...Good luck with it! Cheers, edit: the picture won't display, so you'll have to click the link to see the picture. feh.