Airsoft Canada - View Single Post

caboose36 · April 7th, 2008, 23:20

If you take off the plate on the bottom of the grip, and slide the motor out, there should be two screws inside of the grip. Take those off, and the grip should come right off. Reverse the process, and its back on.

Hope that Helps!

Caboose

April 7th, 2008, 23:20	#2
caboose36 Trader rating Join Date: Nov 2007 Location: Winnipeg, Manitoba	If you take off the plate on the bottom of the grip, and slide the motor out, there should be two screws inside of the grip. Take those off, and the grip should come right off. Reverse the process, and its back on. Hope that Helps! Caboose Last edited by caboose36; April 8th, 2008 at 00:12..