Airsoft Canada - View Single Post

Kos-Mos · March 31st, 2008, 22:17

WGCShop.com
RedWolfAirsoft.com
Uncompany.com

Bought one last week from Redwolf (along with a PDI hop chamber)

I had a Maruzen APS-2 Type 96. It NEEDS the exact same upgrades, as the TRIGGER BOX IS ALWAYS PLASTIC!

I was running a 575 fps setup with the stock plastic trigger box. I had to change the spring guide stopper because I bought the gun non-functional.

Now I am building a 500 fps and 450 fps setup out of a Well G22 (the Laylax'ish stock one, gaz powered) 450 fps being the gaz setup, and 500 on a Prometheus spring with PDI lv. 3 kit.

Also, KM hard piston head is a nice part when your stock one wears out... except if you got PDI Lv3... no need for piston heads.

I however add a piece of ultra density rubber foam to the cylinder head to reduce noise.

March 31st, 2008, 22:17	#8
Kos-Mos Trader rating Join Date: Nov 2005 Location: Lévis (QC)	WGCShop.com RedWolfAirsoft.com Uncompany.com Bought one last week from Redwolf (along with a PDI hop chamber) I had a Maruzen APS-2 Type 96. It NEEDS the exact same upgrades, as the TRIGGER BOX IS ALWAYS PLASTIC! I was running a 575 fps setup with the stock plastic trigger box. I had to change the spring guide stopper because I bought the gun non-functional. Now I am building a 500 fps and 450 fps setup out of a Well G22 (the Laylax'ish stock one, gaz powered) 450 fps being the gaz setup, and 500 on a Prometheus spring with PDI lv. 3 kit. Also, KM hard piston head is a nice part when your stock one wears out... except if you got PDI Lv3... no need for piston heads. I however add a piece of ultra density rubber foam to the cylinder head to reduce noise.