Tightbore, any is good, but if AEG maintainance isn't something you tend to practice, get a 6.04mm. Tighter ones will need more cleaning to prevent any issues. And a couple drops of oil down your loading tube into the breech is good to do every couple thousand rounds to keep the BBs feeding right.
Bearing spring guide, any brand is fine, don't need to shell out $30 for a Systema when a $15 Modify will do the same thing.
Bushings, dual oil channel, brand doesn't really matter. Just avoid bearing bushings.
Hop up rubber, I'm currently using the Madbull 60 degree rubbers, they are working rather well, and will last a while since they aren't made of silicone.
Spring, get a Modify 100 spring, they are nice and willl put out in the area of 360-380fps with your set up.
All of that you can get from
www.airsoftparts.ca for relatively cheap, maybe even under $100.
BTW, Systema isn't the norm, it's just the expensive route.
Quote:
Originally Posted by Mr_Steezy
one other quicky question, how large of a difference between a 6.04 and 6.03/2 barrel actually occurs?
|
Not even really worth paying the extra amount for. 6.04mm will do you just fine in an AEG.