Airsoft Canada - View Single Post

C.G · March 13th, 2008, 20:29

np. you just want something with a smaller thread pitch.. I can't tell you off hand though, im possitive it would be a 10-32, there are also 10-24's threads more coarse.. if the mfg's done a shitty job on threading (i've found that with some guns) you can substitute, it might feel a bit lose to start but thread locker and just tightening it in works too if your all outta options.
Again though if and when you call around and you ask, and they dont have flat machine screws in that size, inquire about flat socket cap screws..
good luck

March 13th, 2008, 20:29	#9
C.G Trader rating Join Date: Sep 2006	np. you just want something with a smaller thread pitch.. I can't tell you off hand though, im possitive it would be a 10-32, there are also 10-24's threads more coarse.. if the mfg's done a shitty job on threading (i've found that with some guns) you can substitute, it might feel a bit lose to start but thread locker and just tightening it in works too if your all outta options. Again though if and when you call around and you ask, and they dont have flat machine screws in that size, inquire about flat socket cap screws.. good luck __________________ _________________________________ Team GHOSTS - Fides et Amicitia G-44