|
Good to know the plastic Guarder hop up unit is possibly part of the problem. I linked this thread to the owner, so he can check up on it.
Still having a huge problem with the cylinder head/nozzle/tappet plate (the new one) it jams up when pressed back and takes some good tugging to get it to come loose. Tappet in fine on it's own and with the cylinder head but no nozzle. Add the nozzle in and it jams back. Undo the top front corner screw from the mechbox and it frees it up. Getting frustrating enough that I gave up for the night, already spent a good four to five hours on the gun today with no improvements. Even a stock V2 nozzle with no internal airseal O-ring is jamming up the exact same way.
|