[CDN_Stalker]

Originally Posted by babacanoosh

Hi guys.
I was wondering out of these parts what you guys would suggest. I am going to be getting a combination of parts and was wondering what you guys would pick.

So far i have:

systema m120 - Too high, will put you well over 400fps. Two weeks ago I put a Prometheus 120 spring in my MP5SD and it settled down to 430fps with hop up ON!!!!

systema magnum motor - If you want, I prefer EG700, no experience with Systema motors though, don't see the point.

king arms 8mm gearbox - King Arms 6mm mechbox, better without the problem with bearings, they jam up on the gears and fall apart sometimes.

prometheous high speed gears - High speed gears are meant for springs that shoot under 330fps, best used with stock springs actually

systema type O cylinder - Reason?

madbull 6.03 inner barrel (AK length) - Sure, good barrels

madbull shark accelerator hopup ( horrible, going to be replacing it with guarder) - Madbull 60deg rubber is serving me well now, is in three of my guns (MP5SD shooting 400fps, MP5A with PDW stock shooting 330fps, CA M24 shooting 500fps)

king arms long silencer

2-6X30 scope - Too much for an MP5, get a low profile mount and an RDS of some type.

9.6 3600 MAH - Good if you are running a 400fps spring (or more), overkill if anything under 400fps. That combined with hi-speed gears will shred pistons at the extreme rate of one piston every game or two (if you make it that long, a client went through two Systema Red pistons in two weeks with the same set up)

I would like to get some new parts:

Please pick the best setup that works well together, including with my already installed parts.

For pistons:

guarder V2 piston
supercore piston
Prometheus piston
Angel piston

For Cylinder heads:

Guarder Cylinder head V2
Prometheus cylinder headv2

Piston Heads:
G&P explosive piston head
Systema duracon bearing piston head

I will be purchasing a firefly hard bucking and big out H nub.

Thanks a lot guys

Offered my opinions.