Airsoft Canada - View Single Post

digital_blue · February 5th, 2008, 23:41

Just oiled the split but the hammer seems to require some assistance to move forward. Dunno if you understand but when the trigger is pulled, the hammer won't always move all the way forward. It sometimes gets stuck about 80% of the way. A light touch will move the hammer all the way forward but it seems that the hammer spring is really weak...

I dunno if this really pertains but about a week ago, I had a small but brief problem. Sometimes, the hammer would not cock although the slide was racked. It appeared to be a problem with the disconnecter sear but I'm not 100% sure since it corrected itself. This problem actually occurred twice so far...

February 5th, 2008, 23:41	#6
digital_blue Trader rating Join Date: Aug 2006 Location: In the sticks	Just oiled the split but the hammer seems to require some assistance to move forward. Dunno if you understand but when the trigger is pulled, the hammer won't always move all the way forward. It sometimes gets stuck about 80% of the way. A light touch will move the hammer all the way forward but it seems that the hammer spring is really weak... I dunno if this really pertains but about a week ago, I had a small but brief problem. Sometimes, the hammer would not cock although the slide was racked. It appeared to be a problem with the disconnecter sear but I'm not 100% sure since it corrected itself. This problem actually occurred twice so far...