Airsoft Canada - View Single Post

Spa · February 2nd, 2008, 21:39

After putting in some upgraded parts, re shimming, etc. i put the AEG back together and test it out..nothing happens.

Now i usually figure these things out, but im completely out of ideas.

Testing out the bottom part of the mech box (split mechbox) i pull the trigger on semi and sparks fly from the trigger, the gears dont move and the wires get really hot.

The shim job is perfect so i have no idea whats going on and theres no spring since its just the bottom part...

Thank you for your support.

February 2nd, 2008, 21:39	#1
Spa Trader rating Join Date: Oct 2006 Location: Winnipeg, Manitoba	ICS M4A1 split mech box After putting in some upgraded parts, re shimming, etc. i put the AEG back together and test it out..nothing happens. Now i usually figure these things out, but im completely out of ideas. Testing out the bottom part of the mech box (split mechbox) i pull the trigger on semi and sparks fly from the trigger, the gears dont move and the wires get really hot. The shim job is perfect so i have no idea whats going on and theres no spring since its just the bottom part... Thank you for your support.