Airsoft Canada - View Single Post

WhatTheWho · January 29th, 2008, 21:12

Basically when the slide is on, the trigger bar is actually in a lower position into the hammer assembly which allows the trigger pull to release the sear. If it's not able to lower into the hammer assembly, then it can't really release the sear when you pull the trigger.

I have to be logging off for a bit, so my replies after this post won't be until late in the night.

January 29th, 2008, 21:12	#12
WhatTheWho Trader rating Join Date: Dec 2002 Location: Edmonton, AB	Basically when the slide is on, the trigger bar is actually in a lower position into the hammer assembly which allows the trigger pull to release the sear. If it's not able to lower into the hammer assembly, then it can't really release the sear when you pull the trigger. I have to be logging off for a bit, so my replies after this post won't be until late in the night. __________________ "The greatest pleasure in life is doing what people say you cannot do."