Airsoft Canada - View Single Post

Kos-Mos · January 20th, 2008, 20:28

The butt plate extender is a NO GO if you are anywhere under 5'5" or short arms. I am 6'3" and I found the gun just ok to hold. Basically you take the same lenght as half the current stock (from the buttplate to the mag) and add it at the end (about 2.5-3")

As for the rubber butt plate, it is just a slip-on rubber "tube". does not add a lot and can't be used to store battery.

If you want some pictures, go on uncompany.com and check their "custom" P-90. It has the buttstock along with some other upgrades.

The plastic tab that has to be removed is just a stopper inside the battery space. if you remove it, your pack will be able to slide in a bit further and ease the installation (othewise you have to force the back plate in then slide it. It puts a lot of pressure on the battery)

January 20th, 2008, 20:28	#10
Kos-Mos Trader rating Join Date: Nov 2005 Location: Lévis (QC)	The butt plate extender is a NO GO if you are anywhere under 5'5" or short arms. I am 6'3" and I found the gun just ok to hold. Basically you take the same lenght as half the current stock (from the buttplate to the mag) and add it at the end (about 2.5-3") As for the rubber butt plate, it is just a slip-on rubber "tube". does not add a lot and can't be used to store battery. If you want some pictures, go on uncompany.com and check their "custom" P-90. It has the buttstock along with some other upgrades. The plastic tab that has to be removed is just a stopper inside the battery space. if you remove it, your pack will be able to slide in a bit further and ease the installation (othewise you have to force the back plate in then slide it. It puts a lot of pressure on the battery) Last edited by Kos-Mos; January 20th, 2008 at 20:35..