|
Really thick silly oil should work ok, I used anhydrous graphite lube since i use it 90% of the time for grease use. Just wrap a reasonable amount around the nozzle, then place the stock nozzle on it with grease and move it back and forth to make sure it compresses enough to allow it easy movement, then put back together. Get's kinda messy on the nozzle, as far as looks go, and I'm not sure how long it'd last, I just came across this trick last weekend (a result of wrapping my hop up rubber on my CA M24's inner barrel before installation, found almost a 20fps increase in fps. So I tried the teflon tape on the nozzle and found the increased compression by working the piston manually was enough to warrant my mentioning it.)
|