Airsoft Canada - View Single Post

The Saint · January 15th, 2008, 14:08

Put the loading nozzle (#12) back into the blowback engine cage (#3). Then, follow this picture.

The the spring guide (#8) will want to stick out of the #3, be sure you use a small screw driver to push it into the cage while you're putting the cage back into the frame. Otherwise, the #8 will prevent you from getting #3 back into the frame properly.

January 15th, 2008, 14:08	#2
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	Put the loading nozzle (#12) back into the blowback engine cage (#3). Then, follow this picture. The the spring guide (#8) will want to stick out of the #3, be sure you use a small screw driver to push it into the cage while you're putting the cage back into the frame. Otherwise, the #8 will prevent you from getting #3 back into the frame properly. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."