Airsoft Canada - View Single Post

RacingManiac · January 7th, 2008, 23:15

I have 2 different scope, one a Guarder Tri-rail 3x scope, and another a ZOS 4x scope for my SG552. Both I have problem zeroing. The longest distance I can use in my house is ~20ft of uninterupted sightline, so thats what I was testing with. I can get the elevation adjusted for that range no problem, but for the life of me I can't get the alignment. For some reason the shot always lands about 3 inches to the right from my center of recticle even at that range, and I have ran out of adjustment for alignment. This is consistant with both scopes, leading me to suspect the actual rail maybe out of alignment. As far as I can tell it is a stock TM low mount rail for the SIG, and I don't see any way of adjusting it, I am wondering if anyone else had some experience with something similar. With the RDS without magnification this is not an issue, and I can get the dot pretty dead on center of my shot(not surprising as it has no magnification I guess), but with magnified optic this is the problem. I've ruled out that this being an operator error as the way I set it up it had very little input from me that can upset the gun and the result is pretty consistant....

Thought I'd ask, not that I use those optics at the moment.....

January 7th, 2008, 23:15	#1
RacingManiac Trader rating Join Date: Sep 2006 Location: Canada/US	Optic Zeroing Problem with TM SG552... I have 2 different scope, one a Guarder Tri-rail 3x scope, and another a ZOS 4x scope for my SG552. Both I have problem zeroing. The longest distance I can use in my house is ~20ft of uninterupted sightline, so thats what I was testing with. I can get the elevation adjusted for that range no problem, but for the life of me I can't get the alignment. For some reason the shot always lands about 3 inches to the right from my center of recticle even at that range, and I have ran out of adjustment for alignment. This is consistant with both scopes, leading me to suspect the actual rail maybe out of alignment. As far as I can tell it is a stock TM low mount rail for the SIG, and I don't see any way of adjusting it, I am wondering if anyone else had some experience with something similar. With the RDS without magnification this is not an issue, and I can get the dot pretty dead on center of my shot(not surprising as it has no magnification I guess), but with magnified optic this is the problem. I've ruled out that this being an operator error as the way I set it up it had very little input from me that can upset the gun and the result is pretty consistant.... Thought I'd ask, not that I use those optics at the moment..... __________________ My Arnies' Album My PBase Album Custom Pistol Whore...