Airsoft Canada - View Single Post

Kos-Mos · January 1st, 2008, 23:37

I already have soo many Li-Po's that I don't know what to do with them
I have a 30C 1800mAh 7.4v pack that takes the same space as a mini. Also some 2100mAh 7.4 and 9.6 at 20C that fit in the same space.

I don't want to use 11.1v, it is overkill for a motor designed to run at 6v. (yes, our motors should be at 6v)

The problem is that it takes 1 hour to charge. A Ni-Mh mini pack will be full in unber 25 min.

Plus the way I am doing it I get a nice 20A drain at 9.6v and 2800mAh capacity.

January 1st, 2008, 23:37	#5
Kos-Mos Trader rating Join Date: Nov 2005 Location: Lévis (QC)	I already have soo many Li-Po's that I don't know what to do with them I have a 30C 1800mAh 7.4v pack that takes the same space as a mini. Also some 2100mAh 7.4 and 9.6 at 20C that fit in the same space. I don't want to use 11.1v, it is overkill for a motor designed to run at 6v. (yes, our motors should be at 6v) The problem is that it takes 1 hour to charge. A Ni-Mh mini pack will be full in unber 25 min. Plus the way I am doing it I get a nice 20A drain at 9.6v and 2800mAh capacity. Last edited by Kos-Mos; January 6th, 2008 at 02:44..