Airsoft Canada - View Single Post

Shrapnel[Op-For] · December 6th, 2007, 20:57

Thanks everyone for the help!

It was actually much easier than I thought. For anyone who gets JT Elites, heres how i did it.

1. Theres on very small plastic bolt holding the top of the goggle, take a multi tool with sharp cutters and cut that. The top is now free to slide out

2. There are 3 more small plastic bolts on the bottom. Cut the two on the left and right, and the middle one just pops out.

3. Carefully slide the goggles out. Now the strap is the only thing holding the goggles to the mask. Right near the lens, on the side where the strap is attached to the goggle, you have to tug a little and the strap slides out. With one side of the strap free, you can now slide the rest of the strap out, and the goggles are now free!

4. To attach the strap back, slide to corner of the strap back in the slot, and use pliers to grab the little bit of strap that sticks out. Pull, and the strap is now back attached.

So thats how i removed it, no dremel, not cutting of the strap, and it wasn't very hard. BUT for some of you, there may be some small spaces where bb's could enter from strange tragectories because the mask it no longer there. To easily solve this problem, go to crappytire and pick up some faom weather stripping. It comes in a big roll, more than enough to replace if anything happens. Just apply the sticky side of the foam to the areas that are exposed (varies from person to person).

Hope this helps future buyers!

December 6th, 2007, 20:57	#6
Shrapnel[Op-For] Trader rating Join Date: Sep 2007 Location: Richmond B.C	Thanks everyone for the help! It was actually much easier than I thought. For anyone who gets JT Elites, heres how i did it. 1. Theres on very small plastic bolt holding the top of the goggle, take a multi tool with sharp cutters and cut that. The top is now free to slide out 2. There are 3 more small plastic bolts on the bottom. Cut the two on the left and right, and the middle one just pops out. 3. Carefully slide the goggles out. Now the strap is the only thing holding the goggles to the mask. Right near the lens, on the side where the strap is attached to the goggle, you have to tug a little and the strap slides out. With one side of the strap free, you can now slide the rest of the strap out, and the goggles are now free! 4. To attach the strap back, slide to corner of the strap back in the slot, and use pliers to grab the little bit of strap that sticks out. Pull, and the strap is now back attached. So thats how i removed it, no dremel, not cutting of the strap, and it wasn't very hard. BUT for some of you, there may be some small spaces where bb's could enter from strange tragectories because the mask it no longer there. To easily solve this problem, go to crappytire and pick up some faom weather stripping. It comes in a big roll, more than enough to replace if anything happens. Just apply the sticky side of the foam to the areas that are exposed (varies from person to person). Hope this helps future buyers!