Airsoft Canada - View Single Post

Death March · November 19th, 2007, 20:56

Well this is how it went today with my PTW.I was plinking down in my range and I was using the M130(Gold Cyl.) and while firing it just stopped feeding BB's? Ok well I know there is a O-ring the kinda replaces the Tappet plate in a regular Mech-box and if said O-ring goes can cause this problem.No biggie,I go to take the Cyl. apart and I can hear parts moving around(not good),so I put it apart and the screw in the Cyl. head had become unscrewed.So the piston and head were now two parts? no damage,cleaned out the parts regreased,put some Loc-tight(242) and it's firing like nothing happened? Has anyone had this happen with the PTW (CQBR).This Cyl. has seen about ten mag's(not alot!).Is this a problem with all Cyl.'s for the ptw?:hammer:

November 19th, 2007, 20:56	#1
Death March Trader rating Join Date: Feb 2006 Location: Manitoba	PTW Buff's needed! Well this is how it went today with my PTW.I was plinking down in my range and I was using the M130(Gold Cyl.) and while firing it just stopped feeding BB's? Ok well I know there is a O-ring the kinda replaces the Tappet plate in a regular Mech-box and if said O-ring goes can cause this problem.No biggie,I go to take the Cyl. apart and I can hear parts moving around(not good),so I put it apart and the screw in the Cyl. head had become unscrewed.So the piston and head were now two parts? no damage,cleaned out the parts regreased,put some Loc-tight(242) and it's firing like nothing happened? Has anyone had this happen with the PTW (CQBR).This Cyl. has seen about ten mag's(not alot!).Is this a problem with all Cyl.'s for the ptw?:hammer: __________________ Death Before Dishonor" Bleeding Black Label"