Airsoft Canada - View Single Post - WE 1911

The Saint · October 14th, 2007, 22:39

The release valve should only go as far as it takes for that little C-clip to be roughly flush with the valve body.

Try taking the sear mechanism apart and reassembling it. If you're not familiar with the WE1911 insides, here's a guide: http://www.arniesairsoft.co.uk/forum...pic=93398&st=0

October 14th, 2007, 22:39	#4
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	The release valve should only go as far as it takes for that little C-clip to be roughly flush with the valve body. Try taking the sear mechanism apart and reassembling it. If you're not familiar with the WE1911 insides, here's a guide: http://www.arniesairsoft.co.uk/forum...pic=93398&st=0 __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."