View Single Post
Old September 26th, 2007, 19:30   #3
CDN_Stalker
Official ASC Bladesmith
 
CDN_Stalker's Avatar
 
Join Date: Jul 2003
Location: Ottawa, Ont.
Send a message via MSN to CDN_Stalker
Ghillie, I'm surprised yo udidn't point him my way! Lol ya bum!!!

From my sniper section on the team forum (all shown from the WGC site):

Quote:
Originally Posted by Stalker
Here's the manual for the CA M24 V2:

http://www.classicarmy.com/showcatal...?acid=111&pg=1

Upgrading to 450fps, I'd recommend these parts (you will need an upgraded cylinder for it, not sure if stock will work with these parts):

Guarder:

Ultra-light Piston for APS2



Piston head for APS2



7mm bearing spring guide for APS2



Clear Hop Up & Bucking rubber



First Factory/Laylax:

PSS2 130SP Spring



Prometheus:

6.03mm 534mm tightbore barrel (needs to trim off about 19mm to make it fit right)



All the above is what I have in my M24 (I have a different spring though, as well as the 9mm spring guide). That spring should give you about 425fps with 0.20g BBs, the tightbore will add another 10fps, and the bearing spring guide another 15fps, bringing you around 450fps.
CDN_Stalker is offline   Reply With Quote