|
I would not buy a TM if you want a metal body. I gone down that road and it expensive considering metal bodies are stock on all the other high-end and some mid-level AEGs. Just my opinion.
Besides an M120, you should get new bushings without the oil tracks, reshim your gears (do the best job you can), and possibly get a new battery. A large 9.6v is personal preference, I would choose an intellect 8.4v 4200.
Once your gears strip, get some torque gears but go ahead and use the ones you have. I got 50,000 on my stock TM gears at ~380FPS. When you are ready to get a new MB look for one that comes with 7mm or 8mm (being the better) bearings. If you plan on shooting long bursts you should consider using a MOSFET switch.
I would look at a CA sl105. CA use high torque motors and come with reinforced MB, metal bushing/bearings, and metal body.
hop this helps,
mateba
|