|
well i found that all my glocks would do that from time to time, the bb's wouldnt feed. Bought a new mag and walla the springs inside the mags dont like to be full of BB's all the time like when you arent using them they should stay empty so the spring doesnt loose its spring. As for your internals i always went out and bought new valves for the mags if i bought them used, TN tight bore inner barrel and a metal slide w/ outter barrel and run standard silicone lubricant that you can buy at Home Hardware just spritz a little bit on like 20 bb's and fire them through the gun and take the slide off and spritz a little on the rails that the slide runs along and a little on the hop-up chamber and throw it all back together and run it through a couple magazines and it should be tip top
If not, there are a couple springs you can buy for the hammer i think and the trigger and the recoil spring which is the big one on top of the outter barrel
__________________
|