Airsoft Canada - View Single Post - Battery will not fully charge

McKee · August 14th, 2007, 04:04

I have a piranha digital charger and there are 3 settings on it.

Battery Type
Capacity
Current
Delta Peak

I have 2 1900 mah 8.4v NiCad batteries, and im charging them with the following settings.

NiCad
1900mah
2amp
6 mv/c

It will charge usually up to about 800mah then it finishes. I have tried varying the amps and changing the peak from 6 to 8 but i cant figure out whats going on with these batteries. Can anyone with experience with this charge help me out? The batteries were stored for a little while uncharged.
Thanks.

August 14th, 2007, 04:04	#1
McKee Merica' Trader rating Join Date: Feb 2003 Location: London, Ontario	Battery will not fully charge - Piranha Charger. I have a piranha digital charger and there are 3 settings on it. Battery Type Capacity Current Delta Peak I have 2 1900 mah 8.4v NiCad batteries, and im charging them with the following settings. NiCad 1900mah 2amp 6 mv/c It will charge usually up to about 800mah then it finishes. I have tried varying the amps and changing the peak from 6 to 8 but i cant figure out whats going on with these batteries. Can anyone with experience with this charge help me out? The batteries were stored for a little while uncharged. Thanks. __________________ "Hokey religions and ancient weapons are no match for a good blaster at your side" - Han Solo Commanding in Airsoft