Airsoft Canada - View Single Post - adapting a radio connector for DEVGRU headset?

Jerold · May 5th, 2007, 09:36

Ibby:

Thanks for checking in!

No, I haven't progressed with it. I don't really have much of a clue in determining the correct connections for all the wiring.

The only thing that I did do was get an adapter from ebay. It was the one that "VinnyGT19" wrote about in this post. It is a Hirose adapter and does fit on the MX300. I took it apart and it has wires soldered to specific contacts. I am guessing that once the wiring translation between the DEVGRU and the Motorola is done and comparing it to the wiring setup on the MX mike contacts, that it would be a soldering job to re-position the wires to the correct contacts.

I don't know if I sent you any photos of that adapter. Let me know and I'll email you a batch.

I really aprreciate your help and your time with this.

Jerold

May 5th, 2007, 09:36	#30
Jerold Trader rating Join Date: Feb 2007	Ibby: Thanks for checking in! No, I haven't progressed with it. I don't really have much of a clue in determining the correct connections for all the wiring. The only thing that I did do was get an adapter from ebay. It was the one that "VinnyGT19" wrote about in this post. It is a Hirose adapter and does fit on the MX300. I took it apart and it has wires soldered to specific contacts. I am guessing that once the wiring translation between the DEVGRU and the Motorola is done and comparing it to the wiring setup on the MX mike contacts, that it would be a soldering job to re-position the wires to the correct contacts. I don't know if I sent you any photos of that adapter. Let me know and I'll email you a batch. I really aprreciate your help and your time with this. Jerold