Airsoft Canada - View Single Post

mcguyver · April 30th, 2007, 23:39

The nozzle should be in it's forward-most position when the piston is fully back. When the piston releases (a small turn of the sector gear), that nozzle must be fully engaged (forward) in the hop-up in order to maximize your output. The tappet return spring accomplishes this.

Double feeding can also be caused by a dry or over-engaged hop-up as well. Lube the hop rubber, turn it fully off and see if double feeding continues.

April 30th, 2007, 23:39	#2
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	The nozzle should be in it's forward-most position when the piston is fully back. When the piston releases (a small turn of the sector gear), that nozzle must be fully engaged (forward) in the hop-up in order to maximize your output. The tappet return spring accomplishes this. Double feeding can also be caused by a dry or over-engaged hop-up as well. Lube the hop rubber, turn it fully off and see if double feeding continues. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.