|
hmm
where you the one who did the mesures.
because I don't see anywhere on the page you have posted a cell that have been butchered to mesure it.
Just so you know, we mesure the cells WITH the protective cover. it is called "working condition" you can't run the pack without the plastic.
And variations in LENGHT occur all the time. 1/2 a milimeter longer is within the fabrication standards for a 2/3AF cell. They can vary of up to 0.80mm if I remember well. It makes no difference in capacity or drain rate.
The only possible way to make a pack higher capacity is to densify the internals to squeeze more stuff in there. Doing so will also raise the internal resistance.
Looking at the specs only, remove all the wrapings and I would say it is actually some 1400's zapped of some similar conditioning process.
Just so you know. As fresh new Intellect 1400mAh pack will hold about 1700-1800mAh. It is always above the rated capacity. A 1400mAh pack that holds only 1400mAh is near the end of it's life. It got no punch and can't last hafl the time it used to.
|