Ignore the M700, there are only two types really, both as gas powered.
And, as I got dragged into this (is ok, situation normal! Lol), here's a list I composed for a user on my Sniper's Range forum (Warmonger's website) last year. I've got everything in here, except my spring is a Laylax 150SP and I am using the PSS2 9mm spring guide. If you want under 450fps, then use what I listed below. Just remember, PSS2 is for the APS2 series (all adaptable except the cylinder for the CA M24) and when you order, anything listed as PSS10 is for the TM VSR, NOT compatible!
Quote:
|
Originally Posted by Stalker
Here's the manual for the CA M24 V2:
http://www.classicarmy.com/showcatal...?acid=111&pg=1
Upgrading to 450fps, I'd recommend these parts (you will need an upgraded cylinder for it, not sure if stock will work with these parts):
Guarder:
Ultra-light Piston for APS2
Piston head for APS2
7mm bearing spring guide for APS2
Clear Hop Up & Bucking rubber
First Factory/Laylax:
PSS2 130SP Spring
Prometheus:
6.03mm 534mm tightbore barrel (needs to trim off about 19mm to make it fit right)
All the above is what I have in my M24 (I have a different spring though, as well as the 9mm spring guide). That spring should give you about 425fps with 0.20g BBs, the tightbore will add another 10fps, and the bearing spring guide another 15fps, bringing you around 450fps. |