|
m500 pump/action bar replacing
PM me jrico if you'd like me to walk you through it.
I just broke the arm on my black m500, so it's in
pieces awaiting new action bars from WGC.
Bean is right, his info is accurate. The process is
really very simple compared to Maruzen's complex/
fragile internals.
The action bars aren't locked in really, once you get
them off the pump, then remove the trigger area by
taking out one pin + a screw, the inner works can
be wiggled out leaving the arms loose in their slots.
__________________
Retired — Freedom 35
|