Airsoft Canada - View Single Post

Murdoch · February 6th, 2007, 17:14

Well the rubber did end up going in the alcohol, but it wasn't for very long; so I used the soap and water to clean it up and let it dry. It does seem to be shooting better, but I do tend to get jams a few times per mag while on full auto. It may be mag cool down, but it's unlikely since it only takes ~2-3 seconds to empty the mag. I've ordered some new parts and a hopup rubber so I'll see how it turns out once they are installed.

BTW, I took some pics of the disassembly in case anyone who might do the same thing wanted to see. I never did get the cocking handle off; but it wasn't necessary in my case... If someone wanted to return the favor by scanning the manual that came with their KSC M11, it would be greatly appreciated.

Howlin' Mad Murdoch

February 6th, 2007, 17:14	#7
Murdoch Trader rating Join Date: May 2006 Location: Scarborough, Ont.	Well the rubber did end up going in the alcohol, but it wasn't for very long; so I used the soap and water to clean it up and let it dry. It does seem to be shooting better, but I do tend to get jams a few times per mag while on full auto. It may be mag cool down, but it's unlikely since it only takes ~2-3 seconds to empty the mag. I've ordered some new parts and a hopup rubber so I'll see how it turns out once they are installed. BTW, I took some pics of the disassembly in case anyone who might do the same thing wanted to see. I never did get the cocking handle off; but it wasn't necessary in my case... If someone wanted to return the favor by scanning the manual that came with their KSC M11, it would be greatly appreciated. Howlin' Mad Murdoch