|
Here is my suggestion at improving your mod.
(See attached pictures)
It may need reinforcing along the cut on the back side of the bolt, but I am not familiar with this gun, so I can't advise you on that.
I would like to note that if someone was to attempt the mod with my changes that the 'nut' used be SMALLER, because then the hole cut on the bolt does not sacrifise as much durability and mainly, so that when the bolt is at resting position, the nut and the cut in the bolt is not seen, as shown in this picture.
(See 'smaller nut' picture)
Then a nail/screw/metal head would have to be used as well... to keep it from breaking under use
Thoughts?
|