|
Sorry, not familiar with Guarder pistons. How many teeth? Here's my setup (sorry, long list too):-
1) SystemA Cylinder head
2) SystemA nozzle
3) Prometheus D-type Cylinder
4) Angel 300mm spring (1.5 loop cut)
5) SystemA Spring Guide
6) Guarder tappet plate
7) SystemA High Speed Piston (filed off first 2 teeth)
8) SystemA Duracon Piston Head
9) SystemA All Helical High Speed gears (Sector gear filed off 2 teeth)
10) Prometheus Reverse latch lock
11) SystemA Turbo Motor
12) Using LiPo 11.1V/2150mAh battery
Need to clock but think I was getting about 34BB/sec at 0.98J.
|