This is the list of parts that I have:
KM 6.04mm TN Inner Barrel for Tanaka M700 A.I.C.S. ( 587mm )
KM Custom Magazine Part for Tanaka M700
G&G Power Bolt for Tanaka M700 / M24
G&G Valve Knocker for Tanaka M700 / M24
G&G Power Pack for Tanaka M700 / M24
G&G Gas Route Connecter Spring for Tanaka M700 / M24
G&G Rubber Set for Tanaka M700 / M24
G&G Outer Barrel Locking Nuts for Tanaka M700 & M24
G&G Steel Cocking Piece for Tanaka M700 / M24
Tanaka Bipods Pivot For Tanaka M700 A.I.C.S.
Excuse the weird grammar for some of the items, those names/descriptions are taken directly from the retailers that I bought them from. I realize now that some of those parts are unnecessary, such as:
- the bipod pivot - I'm using a Harris bipod
- The Power Bolt - I think 600+fps is more than I'll ever use...
- *the G&G rubber set* - I read across the internet on a couple of forums that the hop up hole on the inner barrel is different shaped than the other Tanaka M700 type guns, and that the AICS hop up set is of a better design than the other guns
I'll get more in depth once I actually try installing the stuff.
Quote:
Originally Posted by B.C.Hawk
I believe there is a allen set screw to lock in the adjuster. Once you set velocity,you can basically lock it in. Makes a big difference in setting fps. I found this out on my Tanaka Takedown.
|
I'm aware of this allen screw - backing it off the thread has no affect on the difficulty of turning the adjustment knob.