hi,
i´m writing from germany so please forgive,for my
(sometimes not always correct)english....
after playing around with my guns,for a year in unmodifyed condition,
i decided to build my own gearbox together and give it that little twist to it.
here is my current set up....
gearbox= pro-gear reinforced gearbox v2
piston= deep-fire titanium full-theeth
Gears= prometheus eg hard gear set
cylinderhead= ics silent-head-set
cylinder= prometheus stainless hard cylinder
bushings= guarder steel (oil-reservoir)
spring= guarder sp110
springguide= guarder steel(bearings)
selectorplate= prometheus hard plate
tappetplate= guarder reinforced
cutofflever= guarder steel
switchunit= systema low resistence
nozzel= guarder
arl latch= guarder steel
trigger= hurricane steel
everything is shimmed and lubed the right way and assembled,but i have one question...
i´m not sure if i should switch over to a normal deepfire reinforced piston(titaniumteeth´s seems a little to much on the gear´s) and also downgrade the spring to a sp100,
(with guardersprings u never really know
),as i want my set up to be a little more
reliable.
this set up is going to do it´s work in a brand new G&G GR16 G4(2006 bash)
another question:
should i stick with my 9,6V1500mAh batt´s or step up to 10,8V1700mAh and also switch to a TM eg1000?
greetings from the other side of the world
CAP`N`CRUNCH