Airsoft Canada - View Single Post

Trader rating · September 13th, 2006, 12:42

I make my own.
But if your after the best end product, then yah, UAP NAPA sells some acceptable ones. I suggest the two part ones(main + activator) and run through a spray gun, but thats not something everyone can do(though not impossible. Some discount automotive places sell compessors damm cheap...Same with spray guns. For this kind of stuff, you dont need a $700 spray gun, heck, I picked up a spare gun for $40 from princess auto, they arnt the best, but they work...I have seen half-decent airbrushes for $20. Its not needed, but its one of these things that once yo get, you'll find all kinds of thing to paint with it).
You should be fine with automotive primer from canadian tire. But if your painting a metal body, make sure you use a metal primer, if your using a plastic body, use a plastic primer. I highly suggest Dupont primers and paints.

If its a high solid primer, a quick run with fine steel wool after it dries helps.

I clean before priming. Usually with pure methel hydrate...and watch your fingers. Human oil is a bitch and can mess with spraying, so handel your parts with gloves.

but thats just me. I spray professionally, so little things that matter to me, you'll prolly never notice. Many get excellent results with plain cheap spray paint.

September 13th, 2006, 12:42	#14
Droc Guest Trader rating	I make my own. But if your after the best end product, then yah, UAP NAPA sells some acceptable ones. I suggest the two part ones(main + activator) and run through a spray gun, but thats not something everyone can do(though not impossible. Some discount automotive places sell compessors damm cheap...Same with spray guns. For this kind of stuff, you dont need a $700 spray gun, heck, I picked up a spare gun for $40 from princess auto, they arnt the best, but they work...I have seen half-decent airbrushes for $20. Its not needed, but its one of these things that once yo get, you'll find all kinds of thing to paint with it). You should be fine with automotive primer from canadian tire. But if your painting a metal body, make sure you use a metal primer, if your using a plastic body, use a plastic primer. I highly suggest Dupont primers and paints. If its a high solid primer, a quick run with fine steel wool after it dries helps. I clean before priming. Usually with pure methel hydrate...and watch your fingers. Human oil is a bitch and can mess with spraying, so handel your parts with gloves. but thats just me. I spray professionally, so little things that matter to me, you'll prolly never notice. Many get excellent results with plain cheap spray paint.