Quote:
|
Originally Posted by mcguyver
Quote:
|
Originally Posted by Kid
You have to hit that pin out, after it's out, I suggest sanding it down.
It was a bitch for me the first time.
BTW, the small pin by the selector.
|
That's because you hit it out the wrong direction. One side is usually either tapered slightly or has ridges on it to keep it in the mechbox. Sanding it down will likely cause you to lose it in the field.
Not that it's necessarily a bad thing, but if you have some movement of your mechbox inside the body, it can be a bit of a hassle. Fire selection could become fussy. Remember, They put it in there for a reason. |
It was infact tapered and I was hitting it the right way, basically when I am suggesting is just sand the paint off it and maybe oil it.
It's still a bitch to get out, but it's now possible with a hammer and punch
It has zero movement and would never fall out in the field.
I think this must be common in the CA..