Airsoft Canada - View Single Post

Jar|-|ead · July 18th, 2006, 22:24

plastic or metal body SRC M16?...cuz i had problems with a plastic SRC m4 lower reciever

1) Can You take apart the src m4 the same way as the TM?
Yes,same way

2) If i get the m4 metal body, do i have to get TM's Parts?
You might as well get full assemble TM or better mechbox to fit into the metal body.SRC crack LIKE CRAZY.

3) There Appears to be no spring on the cocking lever, but ive seen other TM M4s that have the leaver spring back, can i put a spring into mine?
Do you mean the charging handle?THEY SHOULD have one.

4) How do i Dissassemble the SRC RIS?
I can show you in-person.

5) Side Sling Mount, better than lower mount? or not?
It doesn't matter.I took me sling out.

July 18th, 2006, 22:24	#9
Jar\|-\|ead Banned Trader rating Join Date: Dec 2005	plastic or metal body SRC M16?...cuz i had problems with a plastic SRC m4 lower reciever 1) Can You take apart the src m4 the same way as the TM? Yes,same way 2) If i get the m4 metal body, do i have to get TM's Parts? You might as well get full assemble TM or better mechbox to fit into the metal body.SRC crack LIKE CRAZY. 3) There Appears to be no spring on the cocking lever, but ive seen other TM M4s that have the leaver spring back, can i put a spring into mine? Do you mean the charging handle?THEY SHOULD have one. 4) How do i Dissassemble the SRC RIS? I can show you in-person. 5) Side Sling Mount, better than lower mount? or not? It doesn't matter.I took me sling out.