|
You know how to get the bolt out? Remove the mag, pull the bolt back, in front of the trigger is a flat peice of metal (in between the trigger and mag release), press it and pull the bolt out throught he back. Once out, remove the two slotted screws you see halfway down the bolt, and remove the allen/hex head set screw right at the rear. Try turning the rod that has the striker spring one way or the other, reassemble and test. Keep doing that until you get it the way you like it. Adusting that rod with the spring on it sets the preload tension of the striker (and the resultant fps).
Hope that helps you out some, glad you made a bit of progress. Good luck!
|