Airsoft Canada - View Single Post - semi auto not working

crazyguy · April 24th, 2006, 19:35

hey there,
first of all sorry for any mistakes i make!

well, my original ics gearbox was cracked in the end, i replaced it with a tokyo marui one..
cleaned all the pieces and get it all together, in the start i had a problem with the tappet plate it was stuck because its height was too big so i poolished it with some glasspaper and now it works, then i saw that the switch doesnt fit good so i made some changes in it.. i think the problem comes from the cut-off lever, i checked it out but evry thing seems to be ok...

i shimmed the gearbox just fine, it runs auto like hell, but no semi-auto.
another problem maybe because the gun fires too fast that its not taking the bullets from the magazine, my magazine is after a great upgrade that i made, before i replaced the gearbox evrything was just fine.

April 24th, 2006, 19:35	#1
crazyguy Trader rating Join Date: Feb 2006 Location: israel	semi auto not working - ICS mp5a5 hey there, first of all sorry for any mistakes i make! well, my original ics gearbox was cracked in the end, i replaced it with a tokyo marui one.. cleaned all the pieces and get it all together, in the start i had a problem with the tappet plate it was stuck because its height was too big so i poolished it with some glasspaper and now it works, then i saw that the switch doesnt fit good so i made some changes in it.. i think the problem comes from the cut-off lever, i checked it out but evry thing seems to be ok... i shimmed the gearbox just fine, it runs auto like hell, but no semi-auto. another problem maybe because the gun fires too fast that its not taking the bullets from the magazine, my magazine is after a great upgrade that i made, before i replaced the gearbox evrything was just fine.