|
Ics does not make one yet. I don't know if they have plans to or not. The poblem is the adapter that holds the buffer tube onto the stock. It is like a small pipe with a cap on the end that has a threaded hole in the end of it. You screw it onto the stock (that's the flathead screw you see on the back of the body under the bufer tube) and then slide the buffer tube onto it and use a screw inside the buffer tube to screw it onto the adapter. That's the problem. The buffer tube is completely sealed so there's no way to run wires through it for the stock. I put everything together and drilled a small hole through that cap that's blocking everything so that I could run my wires through it.
Spaceghost was just saying that he cut the cap right off and just used the JB weld to hold the buffer tube to the adapter rather then the screw that would have gone into the cap.
Like I said, it won't make sense unless you take it apart and look at the parts as I'm explaining things... if need be I can take pictures, but I'm busy with work and school at the moment, so I'd rather not have to resort to that.
|