Airsoft Canada - View Single Post - ICS MP5SD5 Problem (possible gear or motor problem?)

IRONSIGHT · March 10th, 2006, 10:48

Have you checked to see if the gear on the motor is tight on the shaft. If the shaft or gear is defective at the mating surface it may be spinning on the shaft. If this is happening then the teeth on the gear will not show any signs of wear as it is not actually turning when under load.

March 10th, 2006, 10:48	#7
IRONSIGHT Trader rating Join Date: Mar 2006 Location: Mount Albert (North of Toronto)	Have you checked to see if the gear on the motor is tight on the shaft. If the shaft or gear is defective at the mating surface it may be spinning on the shaft. If this is happening then the teeth on the gear will not show any signs of wear as it is not actually turning when under load.