Airsoft Canada - View Single Post

mcguyver · February 16th, 2006, 00:31

Most double feed issues I've come across have been as a result of too much hop-up. There was a case though with a tight nozzle on a G&P but that caused mutliple feeds.

Try turning your hop-up off completely and put just a little silicone oil in the feed nozzle. Fire some rounds and see what happens. If it's ok, the re-adjust your hop-up and fire off a couple of hundred rounds to remove any excess silicone oil. Or you could just use a cleaning rod (like one from a Marui gun) to clean out the hop and barrel until it's squeaky clean.

February 16th, 2006, 00:31	#5
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	Most double feed issues I've come across have been as a result of too much hop-up. There was a case though with a tight nozzle on a G&P but that caused mutliple feeds. Try turning your hop-up off completely and put just a little silicone oil in the feed nozzle. Fire some rounds and see what happens. If it's ok, the re-adjust your hop-up and fire off a couple of hundred rounds to remove any excess silicone oil. Or you could just use a cleaning rod (like one from a Marui gun) to clean out the hop and barrel until it's squeaky clean. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.