Airsoft Canada - View Single Post - TM M9 performing like springer

Mysteryfish · December 28th, 2005, 16:11

you're using wuss gas, IMO... Any time I used "duster" or 134a in the TM berettas I used, they wouldn't function.

That, combined with whatever grit and fine particulate matter has collected in the tracks of the slide, and soforth, is probably producing enough friction on the slide to make the cooldown stop your gun.

Take er' apart, clean very well, LIGHTLY oil and wipe, then try again.

Also
- hammer spring could be wimping out.
- Could be a valve problem - borrow another magazine to check that

Don't overlube your guns. That's more detrimental than helpful. A thorough cleaning and an extremely thin layer of oil will be best. Thick lube collects debris and shit more quickly than anything.

December 28th, 2005, 16:11	#10
Mysteryfish Trader rating Join Date: Mar 2004 Location: North Vancouver, B.C.	you're using wuss gas, IMO... Any time I used "duster" or 134a in the TM berettas I used, they wouldn't function. That, combined with whatever grit and fine particulate matter has collected in the tracks of the slide, and soforth, is probably producing enough friction on the slide to make the cooldown stop your gun. Take er' apart, clean very well, LIGHTLY oil and wipe, then try again. Also - hammer spring could be wimping out. - Could be a valve problem - borrow another magazine to check that Don't overlube your guns. That's more detrimental than helpful. A thorough cleaning and an extremely thin layer of oil will be best. Thick lube collects debris and shit more quickly than anything.