Quote:
|
Originally Posted by CDN_Stalker
Ya, 43C with the humidity, actual temp was about 36C. I actually did a couple things to drop the fps down, one was to trim off a couple coils from the striker spring (hits too hard) yielding a more level gas release (hae a Tanaka striker spring on order as recommended), and backed off the loading adustment rod (striker spring guide rod) a bit (found that mine only turns 1/4 turn when it should be 2 full turns).
Duster, not sure the brand, but it was the tetraflouroethane, I make sure of that when I buy the stuff (only need it now for the M700, all my other GBBs use propane.)
|
Only played counter sniper up to now...wanna see if sniping can bring the adrenaline level even higher.
You say it hits too hard...does it matter if u use .36gBBs(graphite coted ones) or .43gBBs. Let's say you take it from the box, do you actually have to trim the coil, turn down the fps from the screw...or should be just fine as it comes.
Danny