|
Ya, 43C with the humidity, actual temp was about 36C. I actually did a couple things to drop the fps down, one was to trim off a couple coils from the striker spring (hits too hard) yielding a more level gas release (hae a Tanaka striker spring on order as recommended), and backed off the loading adustment rod (striker spring guide rod) a bit (found that mine only turns 1/4 turn when it should be 2 full turns).
Duster, not sure the brand, but it was the tetraflouroethane, I make sure of that when I buy the stuff (only need it now for the M700, all my other GBBs use propane.)
|